![]() ![]() ![]() If you want to change anything, click the settings cog in the upper right corner of the display (move the cursor to make it appear). Your DAKboard should load with your previously configured settings. Once the Raspberry Pi has fully rebooted, use a connected mouse and keyboard to log in to DAKboard. Type sudo reboot and press Enter to restart the Raspberry Pi. Press Ctrl + O and Enter to save the changes, and press Ctrl + X to exit nano. Inside nano, add these four lines (without the bullet points): ![]() To exit nano, press Ctrl + X.įinally, to force the screen to stay on and automatically boot with loaded in Chromium, type sudo nano ~/.config/lxsession/LXDE-pi/autostart and press Enter. To save the changes, press Ctrl + O, then press Enter. Add these lines to the end of the file (without the bullet points): This opens the config file in the nano text editor. In Terminal, type sudo nano /boot/config.txt and press Enter. Next, you will want to edit the config.txt file to rotate the screen 90 degrees. This will hide the cursor when not in use. While still in Terminal, type sudo apt-get install unclutter and press Enter. When asked if you want to reboot the Raspberry Pi, select No. Go to Localisation Options and set your correct time zone and keyboard layout.Go to Interfacing Options > SSH > Yes and press Enter.Go to Boot Options > Desktop Autologin Desktop GUI and press Enter.If you want to hang the monitor vertically instead of horizontally, you will also need to rotate the display.įirst, power on the Raspberry Pi, open Terminal and type in sudo raspi-config. The idea is that, when powered on, the Raspberry Pi will automatically boot to your DAKboard. Set up the Raspberry Pi to boot to DAKboard Save your changes when you're satisfied with the DAKboard layout. To-Do as a task manager to display and add a custom message to the DAKboard.īy upgrading to DAKboard Premium, which starts at $4.95 per month (no specific info about international pricing and availability), you can unlock the ability to add additional calendars, set a Vimeo, YouTube video or website as the background, select Dark Sky as the weather source, add thermostat integration, get stock quotes and add additional RSS feeds to your display. After that, you can connect up to two ICAL calendars for free, select between Yahoo and AccuWeather for the forecast source, add a single RSS feed for rotating headlines, and connect Todoist, Wunderlist or Select a date-and-time format.įor background options, you can choose between a host of different sources, such as Instagram, Apple Photos, For instance, start by choosing your time zone, selecting either an analog or a digital clock. Next, you must configure DAKboard to suit your needs. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |